Table of Contents
Advertisement
Video reCordinG
1.
Turn on the helicopter, the power switch is under the helicopter (pic. 1)
2.
Wait for the red and yellow light at the rear of the helicpter to light up (pic. 2)
3.
Insert the Micro SD card into the Micro SD Card slot (pic. 3)
4.
When the card is inserted correctly, the yellow light will turn off (pic. 4) The
helicopter is now in video standby mode.
5.
Turn on the handheld transmitter and press the video button (pic. 5)
6.
The red light should now start flashing (pic. 6)
7.
The camera is now recording (pic. 7)
8.
Press the video button to stop recording (pic. 8)
9.
The red light will stop blinking and remain on and save the video (pic. 9)
10. If you do not press the stop button before turning off the heli, you will lose the the
last unsaved section of video.
Video playbaCk
Remove the Micro SD card (pic. 1) & insert into card reader and connect to a USB
connection on your computer (pic. 2).
Alternatively you may plug a Mini USB lead into the built in USB slot (pic. 3).
Video Format : AVI
Video Resolution : 640 x 480
www.jperkinsdistribution.co.uk
(pic. 3)
11
Advertisement
Table of Contents
