Table of Contents
Advertisement
Activate Preprogrammed Channels
This equipment must be activated for the
preprogrammed AdventistSat Television and
Radio Services on satellite AMC4.
1.
Press the STB button on the remote to
control the Set Top Box with the universal
remote control.
2.
If required, press VOL/Right arrow to select an alternative
language. Skip this step for default English language
selection.
3.
Press the MENU button to open the Installation
screen.
4.
Press CH/UP arrow to select Factory Reset.
5.
Press OK to open the Factory Reset screen.
6.
Do not press OK!
7.
When prompted with the on
screen message "Do you want to
load special data?", select YES then press OK.
8.
After the 2nd "Wait a Moment" on-screen prompt disappears
the receiver will reset and display a banner across the bottom of the
TV screen for Channel 1, the Hope Channel. The receiver is now
activated.
www.AdventistSat.com
Enter 1010 with the keypad.
Toll Free 866-552-6882
23
Advertisement
Table of Contents
