Uniden iGO CAM 800 Owner's Manual page 11

Menu Settings
Please note, you cannot access MENU in the Video mode,
when the the unit is recording. To access the Menu settings, you
will need to stop recording by pressing OK.
NOTE
Press the MENU button to open the Menu Settings. Press the SOS button to
switch between the various settings and display the options under them. Use
the UP/DOWN key to scan the options under each menu setting and then
press the OK button to select the required option. Press the MENU button to
exit the Menu mode.
MP
Use this setting to set the video resolution from the available options. For
example, if you need better clarity, choose a higher resolution, but if you want
to keep the file size small, choose a lower resolution.
RT
This setting allows you to set the time duration for each recording. If you
choose 2 minutes, the recordings will be saved into temporary files that are 2
minutes long.
Sensor ON-OFF
Use this setting to choose the lens for recording the videos. You could choose
between front, back or both the lens.
Setting
Use the options available to change the various settings listed below:
•
Bright
This settings has the following options- Auto/Sunlight/Fluorescence/
Cloudysky/Tungsten. Choose any one of the option to define the
condition for the recordings.
•
Exposal
This setting allows you to set the brightness of the video. The options
available range from -3 to +3. The default setting is 0.
UNIDEN iGO CAM 800
11
Vehicle Recorder