How To Stop The Engine - Zenoah G231PUM Owner's Service Manual

6.2
G231PUM/G231PUH/G260PUM/G260PUH/G290PUM
a. Fill the fuel tank with the fuel.
b. Push the priming bulb upper the carburetor until fuel appears in the priming bulb.
c. Choke the engine and open the throttle valve approximately 1/4~1/3 of the full open
position.
d. Make sure that the "Lock Knob" of aircleaner is positioned at lock position.
(G260PUH/G231PUH)
e. Quickly pull the starter cord when the initial combustion noise is heard.
f. When the initial combustion noise is heard, open the choke, set the throttle valve at
the idle position or at the position slightly open from the idle position and quickly pull
the starter cord a few more times. Then the engine starts.

7. How To Stop The Engine

For stopping the engine, the black lead wire from the coil should be grounded to the
engine body, or the throttle valve should be closed completely.
Fig.4
8
Red Lead
Black Lead
Engine Body Earth
Kill Switch