Behringer Shark DSP110 User Manual page 21

Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Input
+
Please ensure that only qualified persons install and operate the SHARK.
During installation and operation the user must have sufficient electrical
contact to earth. Electrostatic charges might affect the operation of the
SHARK!
SHARK DSP110
Balanced use with XLR connectors
2 1
1 = Ground / Shield
2 = hot (+ve)
3 = cold (-ve)
3
For unbalanced use pin 1 and pin 3 have to be bridged
Fig. 3.2: Different plug types
3. INSTALLATION
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+ve)
Ring =
cold (-ve)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
1 2
3
Output
21