Necessary Settings Before Use; Charging The Battery Pack - JVC Everio GZ-HD30 Manual Book

Necessary Settings before Use

Charging the Battery Pack

1
Close the LCD monitor to turn off the
camera.
2
Attach the battery pack. battery pack.
3
Connect the AC adapter.
AC Adapter
•
The power/charge lamp blinks to
indicate charging has started.
•
When the lamp goes out, charging is
finished.
1
EN
BATT.
DC Connector
To AC Outlet
(110V to 240V)
Required charging/recording time

(approx.)
*When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Battery pack Charging time
BN-VF815U
2 hr. 40 min.
(Provided)
BN-VF823U 3 hr. 50 min.
NOTE
The actual recording time may shorten
depending on the recording environment, such
as when recording scenes with fast moving.
To detach the battery pack

Slide and hold BATT. (step 2), then remove
the battery pack.
To check the remaining battery power

See page 24.
NOTES
•
You can also use the camera with just the AC
adapter.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Recording
time
1 hr. 25 min.*
2 hr. 10 min.*