Clock (Lithium) Battery Insertion/Removal - JVC Camcorder User Manual

6
EN
A
GETTING STARTED

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to
perform date/time settings.
SWITCH OFF POWER
1
Switch off the unit's power and remove the power
supply unit.
OPEN COVER
2
Open the clock battery compartment cover while
pressing the release tab.
REMOVE BATTERY (when replacing)
3
Insert a pointed, non-metallic object between the
battery and the compartment (
battery out.
INSERT BATTERY
4
Ensure that the plus (+) side is up and insert a
CR2025 lithium battery and push it in.
CLOSE COVER
5
Close the compartment cover until it clicks in place.
NOTE:
See "SAFETY PRECAUTIONS" (
on safe handling of lithium batteries.
(cont.)
) and pull the
A
pg. 2) for information