JVC Camcorder User Manual page 26

Jvc camcorder user manual
Table of Contents

Advertisement

Select Dial
Viewfinder
MENU
4
MENU END
FOCUS
AUTO
EXPOSURE
AUTO
25. 12. 98
DATE TIME
TELE MACRO
OFF
TAPE LENGTH
T30
M. W. B.
AUTO
ZOOM SPEED
FAST
4
NEXT
Menu Screen
FOCUS
AUTO
MANU
EXIT
Focus Menu Screen
Manual Focus Screen
Manual Focus
NOTE:
You should already have made the necessary viewfinder
adjustments (
continuing.
1
MENU Jog Dial
2
No indication
3
during
recording
4
No indication
during
recording
5
6
NOTES:
To return to Auto Focus, select "AUTO" in step 3.
To re-adjust Manual Focus, repeat the procedure from
step 1.
Be sure to focus the lens in the maximum telephoto
position when you use the Manual Focus mode. If you
focus in on a certain subject in the wide-angle position,
sharply focused images cannot be obtained when
zoomed up because the depth-of-field is reduced at
longer focal lengths.
When the focus level cannot be adjusted any farther or
closer, " " or "
pg. 10). If you haven't, do so before
ACCESS MENU SCREEN
Turn the Select Dial to any position except AUTO
LOCK, then press the MENU Jog Dial. The Menu
Screen appears, and the highlight bar is placed on
"FOCUS".
ACCESS FOCUS MENU SCREEN
Press the MENU Jog Dial.
ACCESS MANUAL FOCUS
Rotate the MENU Jog Dial to move the highlight bar
to "MANU", then press it. " " and " " appear. The
focus is locked at this point.
ADJUST FOCUS
To farther subject . . .
Rotate the MENU Jog Dial upward. " " appears and
blinks.
Go to step 5.
To nearer subject . . .
Rotate the MENU Jog Dial downward. " " appears
and blinks.
Go to step 5.
END ADJUSTMENT OF FOCUS
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is placed on "MENU
END".
CLOSE MENU
Press the MENU Jog Dial. The Menu Screen
disppears and "
" reappears to indicate the focus
is locked.
" will blink.
27
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr-ax16egGr-ax480Gr-ax280

Table of Contents