Viewfinder Indications - JVC Camcorder User Manual

42
EN
8
9
0
!
@
#
$

Viewfinder Indications

1
Cassette Warning /
Tape Remaining Time .........................
When no cassette is inserted: the cassette (
warning blinks.
When Erase Protection tab is not in the position
that allows recording: the cassette (
lights. Otherwise, the tape remaining time is
displayed and the tape remaining time warning
blinks when the tape is about to reach its end.
When the Power Switch is set to "PLAY" and a
tape is loaded: the cassette (
displayed regardless of the Erase Protection tab's
position.
2
Recording Mode (SP/LP) Indicator .......
3 9
, Programme AE Indicator ................
Displayed at 3
Select Dial is switched from one position to
another. Then only the indicator remains at
3 0
, Fade-Standby Indicator ..................
3
Displayed at
Fader is engaged by pressing the EFFECT button.
Then only the indicator remains at
4
Multi-Function Control Indication ......
Displayed when any of the buttons located on
the Multi-Function Control is pressed. The
indication disappears within approx. 2 seconds.
5
Super LoLux Indicator .........................
6
Tape Length Indicator .........................
7
Zoom Indicator Bar .............................
8
Recording Indicator ............................
!
•Record-Standby Mode Indicator .......
•Lens Cover Warning:
LENS COVER ...................................
1 2 3 4 5
30MIN
REC SP
444
TWILIGHT
5MIN
1 4S
MERRY CHRISTMAS
25. 12. 98
) mark is
for approx. 1 second when the
for approx. 2 seconds when the
0
.
4
S. LX
NORM
LENS COVER
PAUSE
TAPE END
22: 50 :00
@
Interval Timer/Recording Time/
pg. 13 5Sec. Rec Mode Indicator .............
)
#
Instant Title Display ............................
$
Date/Time/Character Display ..............
%
Battery Pack Remaining Power Indicator
) warning
Changes as follows according to the battery
pack's remaining power level:
"
almost gone, the indicator "
power warning), then the unit shuts off. Replace
the battery pack with a fully charged one.
Note: The symbol containing 3 darkened
squares —
pg. 8
that the battery pack is fully charged.
pg. 18
^
Focus Indicator ...................................
&
Exposure Control Level Counter .........
*
White Balance Mode Indicator ...........
9
.
(
Clock Battery Warning
pg. 20
Blinks for approx. 10 seconds when the power is
turned on. This display also blinks when the
clock (lithium) battery is either not installed or
has discharged. Install or replace the old battery
pg. 20
with a new one (
)
• Tape End Display: TAPE END ...........
Appears when the end of the tape is reached
during playback, recording or fast-forward.
pg. 21
• Condensation Warning:
pg. 8
When this indication appears, all functions
pg. 14
except tape eject and power on/off are disabled.
pg. 12
Turn the unit off (without removing the power
pg. 12 source) for a few hours, and when you turn it on
again the indication should disappear.
pg. 13
INDEX
6 7
T30
%
01
&
MWB
(
". When the power is
— does not necessarily mean
pg. 6).
(cont.)
^
*
)
pg. 15 ,30
pg. 21
pg. 17
" blinks (battery
pg. 27
pg. 28
pg. 29
pg. 13