Taurus Hole Reducers - Gemini Saw Company Taurus Ring Saw Manual

The new Taurus hole reducers come on a sheet and are useful on both
the underside of the saw where the blade exits for water reduction and
on the work surface for inhibiting debris from entering moving parts.
Before applying the hole reducer, clean
the areas around the blade thoroughly and
dry completely.
To apply, peel a hole reducer off of
the sheet.
Open the slit and wrap the
hole reducer around the blade.
Page 20
Note: when applying
the hole reducer to the
underside of the saw it
is best to make it
overlap.