Stabilizer Foot For Taurus 3; Frequently Asked Questions - Gemini Saw Company Taurus Ring Saw Manual

The new Taurus 3 Ring Saw Blade Stabilizer reduces grommet wear dramatically. It
also gives you more control and stability when cutting thicker material. The Stabilizer
adjusts easily to accommodate different thickness material. Perfect when using the
standard blade, separating blade, mega or slicer blade. The spectacular improvement
will be included in all Taurus 3 Ring Saws starting this June at no additional cost. The
Stabilizer will fit all previously purchased Taurus 3 Ring Saws without any
modifications and will be available at your favorite supplier at a nominal cost.
Gemini Saw Company continues to add value to the Taurus 3 Ring Saw with yet
another improvement to the best saw for cutting all types of material.
Q: When do I use the Stabilizer Foot?
A: Always use it with the hand held unit.
When ever more control is desired in the shaping of thicker materials or for
production cutting.
Q: Does the Stabilizer Foot adjust?
A: Yes, it slides up and down to accommodate different thickness materials.
Q: Does the Stabilizer Foot interfere with the light on the Taurus 3?
A: No it does not interfere. You will still be able to see very well.
Q: Can the Stabilizer Foot be used on other Taurus models?
A: It can only be used on with the Taurus 3.
Q: Does the Stabilizer Foot come in different colors?
A: It only comes in gray.
Q: Is the Stabilizer Foot available for people who already own a Taurus 3?
A: Yes, it is available and will require no modification.
Q: Where is the Stabilizer Foot available?
A: You can purchase it at your local supplier or distributor.
Taurus 3 Ring Saw made even better!

Frequently Asked Questions

Page 18