JVC 0997TOV*UN*SN Instructions Manual page 53

Playback Sound
During playback, the camcorder detects the sound mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your playback picture. (32 kHz is preset to "SOUND 1"
and 48 kHz is preset to "FULL SOUND".)
RECORDING SOUND
32 kHz
48 kHz
When watching a tape recorded at 32 kHz, if you want to change the output sound, access the Playback
Menu and, in step 3 on page 52, select "32kHz MODE" and set it for "FULL SOUND", "SOUND 1" or
"SOUND 2". When playing back a tape recorded at 48kHz, set in the same manner. For information on
output sound during Audio Dubbing, see page 65.
NOTES:
You can also use the RM-V711U remote control's AUDIO MONITOR Button to change the output sound
(without having to access the Playback Menu). Make sure you point the remote control at the camcorder's
remote sensor.
During playback, the camcorder detects the sound mode in which the recording was made. This detection
cannot be made during fast-forward or rewind. During playback the sound mode is displayed in the upper
left corner.
TC 12 : 34 : 24
TIME CODE
(Displaying The Time Code During Playback)
You can display the Time Code on screen during
playback. This is especially useful for editing. This
function is preset to "OFF". To turn it on, select
"TIME CODE" at the Playback Menu and change
the setting ( pg. 52).
ON– The Time Code is displayed on the playback
screen.
OFF– The Time Code does not appear.
DISPLAY
FULL SOUND
SOUND 1
SOUND 2
FULL SOUND
SOUND 1
SOUND 2
Display
Minutes
Seconds
Frames*
*25 frames = 1 second
OUTPUT SOUND
Stereo sound
Stereo sound
"L" sound is output on both channels
"R" sound is output on both channels
DISPLAY
(Displaying the Date During Playback)
If the time has been set, the date is automatically
recorded separately from the recorded video signal.
You can display or remove the date anytime during
playback. This function is preset to "ON". To turn it
off, select "DISPLAY" at the Playback Menu and
change the setting (
ON– The date is displayed on the playback screen.
OFF– The date is not displayed.
EN
25 . 12 . 97
10 : 35
pg. 52).
53