Choosing Images Individually - Canon Powershot SX520 HS User Manual

Choosing Images Individually

1
Choose [Select].
●
Following step 2 in "Using the Menu"
( = 82), choose [Select] and press the
[ ] button.
2
Choose an image.
●
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
●
To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
●
Repeat this process to specify other
images.
3
Protect the image.
●
Press the [
message is displayed.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●
Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
Selecting a Range
] button. A confirmation
1
Choose [Select Range].
●
Following step 2 in "Using the Menu"
( = 82), choose [Select Range] and
press the [ ] button.
2
Choose a starting image.
●
Press the [ ] button.
●
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Choose an ending image.
●
Press the [ ] button to choose [Last
image], and then press the [ ] button.
●
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
● Images before the first image cannot be
selected as the last image.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
6
Playback Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
83