JVC 0797TOV*UN*VP Instructions Manual page 42

42
EN
P.AE/Effects
You can choose any one of the effects from the P.AE/Effects Menu.
Display
FOCUS
EXPOSURE
W. BALANCE
FADER
/ WIPE
P. AE
4
/ EFFECT
FLASH ADJ.
RETURN
Manual Mode Item Menu
1 SELECT OPERATION MODE
First turn the Power Dial to "
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2 ACCESS MANUAL MODE ITEM
MENU
Press the Select Dial and move the pointer and
highlight bar to "P.AE/EFFECT" by rotating the
Select Dial.
3 ACCESS P.AE/EFFECTS SELECT MENU
Press the Select Dial. The P.AE/Effects Menu
appears.
4 SELECT EFFECT
Move the pointer and highlight bar to the
desired effect by rotating the Select Dial, then
press it.
• The P.AE/Effects Menu disappears and the
selected mode is activated. The symbol of the
selected mode appears.
P. AE / EFFECT
AUTO
AUTO
AUTO
OFF
SEL. 4
OFF
0
" while pressing
M
RECORDING
2
SLOW X 10
VIDEO ECHO
OFF
1/50 SHUTTER 1/50
SHUTTER
1/100 1/100
1/250 SHUTTER 1/250
1/500 SHUTTER 1/500
P.AE/EFFECTS Menu
Lock button
Power Dial
5 DISABLE P.AE/EFFECT
To turn off the selected effect, re-access the
P.AE/Effects Menu and move the pointer and
highlighlt bar to "OFF" by rotating the Select
Dial. Then press it.
NOTES:
P.AE/Effects can be changed during recording
or during Record-Standby.
If certain Fades or Wipes (
activated, some P.AE/Effects cannot be used. If
you select a P.AE/Effect that is unusable in the
current situation, the effect's symbol begins
flashing.
Advanced Features (Cont.)
PAUSE
The indicator for the selected
mode appears, and the selected
mode is engaged.
Select Dial
pg. 36 – 41) are