Table of Contents
Advertisement
CONTENTS
Models Available ......................................................................3
Backsplash Accessories .......................................................3
for 48" Wide Models ...............................................................4
for 36" Wide Models ...............................................................5
Installation Options ...............................................................6
Tools and Materials Required ...........................................7
Power Supply Locations .....................................................7
Remove Packaging .................................................................8
MODELS AVAILABLE
Rangetops are factory set for natural gas or LP gas.
Order the model for your installation situation.
48" Natural Gas Models:
ZGU484NG - 4 gas burners, grill and griddle
ZGU486NR - 6 gas burners and grill
ZGU486ND - 6 gas burners and griddle
48" LP Gas Models:
ZGU484LG - 4 gas burners, grill and griddle
ZGU486LR - 6 gas burners and grill
ZGU486LD - 6 gas burners and griddle
BACKSPLASH ACCESSORIES
All models require 12" minimum clearance to a
vertical combustible surface at the rear. If clearance
is less than 12", the entire surface of the back wall
above the countertop and the full width of the
rangetop must be protected by a backsplash. The
backsplash must be constructed of non-combustible
material, such as metal, ceramic tile, brick, marble
or other stone.
Two Backsplash Accessories Available:
• The 12" high stainless steel backsplash accessory
is available. Use this backsplash in combination
with a custom, non-combustible backsplash built
beyond the 12" height. The combined height of the
backsplash accessory and the custom backsplash
must reach the bottom of a hood, or when there is
no hood, to 48" above the cooking surface.
Design Information
Installation Instructions
Step 1, Cut the Countertop Opening ..............................9
Step 2, Install the Rangetop ............................................10
Step 3, Connect Rangetop to Gas ................................10
Step 4, Connect Electrical .................................................11
Step 5, Check Burners .......................................................11
Finalize Installation ..............................................................11
Installation Checklist ...........................................................11
Install the Rangetop Backsplash Accessory............12
Backsplash Accessory ................................................ 13, 14
Gas Conversion ............................................................. 15-17
36" Natural Gas Models:
ZGU364ND - 4 gas burners and griddle
ZGU364NR - 4 gas burners and grill
ZGU366N - 6 gas burners
CGU366S - 6 gas burners
36" LP Gas Models:
ZGU364LD - 4 gas burners and griddle
ZGU364LR - 4 gas burners and grill
ZGU366L - 6 gas burners
• An adjustable 30" to 36" high backsplash with shelf
3
is also available. This backsplash fills in the space
between the top of the rangetop and the bottom
of the hood. The shelf is positioned so that heat
lamps from the bottom of a professional hood are
directed towards the shelf.
12" High Backsplash
ZX12B48PSS, for 48" wide rangetops
ZX12B36PSS, for 36" wide rangetops
30" to 36" Adjustable Height
Backsplash With Shelf
ZXADJB48PSS, for 48" wide rangetops
ZXADJB36PSS, for 36" wide rangetops
Advertisement
Table of Contents
