Switching On And Off; Water Temperature Control; Fault Indication; User's Operating Instructions - Main MULTIPOINT FF User Operating, Installation And Servicing Instructions

1. User's Operating Instructions

Switching on and off:

On
1. Turn the main switch to position I.
Off
1. Turn the main switch to position 0.

Water temperature control:

1. Turn the control to the desired temperature.
The hot water temperature is set by the control position.
Turn the control clockwise to increase the temperature and
anticlockwise to decrease.
When the control is set at the maximum position the highest
water temperature is achieved by controlling the flow at the
tap.

Fault indication:

The appliance incorporates a fault indication system.
Fault indication is shown by a red light on the reset button.
If pressing the reset button does not restart the appliance,
consult your installer.
Note: if the appliance is to be left unused in an unheated
area during cold weather the electricity, gas and water
supplies should be isolated and the system drained.
Your installer will be able to advise you.
4 6 720 607 160