Download
Share
Print this page
3M X30N Operator's Manual
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Projector
  5. Digital Projector X30N
  6. Operator's manual
3M X30N Operator's Manual

3M X30N Operator's Manual

Hide thumbs Also See for X30N:

Advertisement

Quick Links

Download this manual See also: Operator's Manual, Network Manual
Digital Projector X30N/X35N
Operator's Guide
TECHNICAL
Warranty
3M warrants that when the 3M Product is used according to 3M's Intended Use
Statement (www.3M.com/meetings), it will perform satisfactorily for the warranted
durability period as stated in the applicable 3M Product Manual in effect at the
time of purchase. The warranties stated in the applicable 3M Product Manuals
are exclusive and are made in place of any and all express or implied warranties
or conditions, including any implied warranty of merchantability or fitness for a
particular purpose, or any industry practice or custom or trade usage.
Important Notice
All statements, technical information, and recommendations related to 3M's
products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate it
and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product
which are not contained in 3M's current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly
agreed upon, in writing, by an authorized officer of 3M.
1

Advertisement

loading

Related Manuals for 3M X30N

Summary of Contents for 3M X30N

  • Page 1 Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M’s Intended Use Statement (www.3M.com/meetings), it will perform satisfactorily for the warranted durability period as stated in the applicable 3M Product Manual in effect at the time of purchase.
  • Page 2 • Automatic adjustment may not function correctly with some input signals. • The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G. © 3M 2009. All Rights Reserved.
  • Page 3 11.9 (60Hz) 1280 x 1024 11.9 1024 SXGA (60Hz) 1280 x 1024 1024 SXGA (75Hz) 1280 x 1024 1024 SXGA (85Hz) 1400 x 1050 11.4 1050 SXGA+ (60Hz) 1600 x 1200 1200 UXGA (60Hz) © 3M 2009. All Rights Reserved.
  • Page 4 Ground Red, Ground Cr/Pr 13 H. sync / Composite sync., (No connection) Ground Green, Ground Y 14 V. sync., (No connection) A : SCL (DDC clock), (No connection) Ground Blue, Ground Cb/Pb C : (No connection) © 3M 2009. All Rights Reserved.
  • Page 5 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator Brightness signal, 1.0Vp-p, 75Ω terminator Ground Ground VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60 • 1.0±0.1Vp-p, 75Ω terminator © 3M 2009. All Rights Reserved.
  • Page 6 AUDIO IN1, AUDIO IN2 Ø3.5 stereo mini jack • 200 mVrms 47kΩ terminator AUDIO IN3 RCA jack x2 • 200 mVrms 47kΩ terminator AUDIO OUT RCA jack x2 • 200 mVrms 1kΩ output impedance © 3M 2009. All Rights Reserved.
  • Page 7 6 7 8 please refer to the following page. Signal Signal Signal (No connection) (No connection) Ground (No connection) (No connection) RJ-45 jack Signal Signal Signal 1 TX+ 2 TX- 3 RX+ 6 RX- © 3M 2009. All Rights Reserved.

  • Page 8: To Input Scart Rgb Signal

    (jack) SCART cable (plug) RCA plugs To input SCART RGB signal to the projector, use a SCART to RCA cable. Connect the plugs refer to above ex.. For more reference, please consult your dealer. © 3M 2009. All Rights Reserved.
  • Page 9 6 7 8 CD (1) RD(2) (2) RD TD (3) (3) TD DTR (4) GND (5) (5) GND DSR (6) RTS (7) (7) RTS DTS (8) (8) CTS RI (9) © 3M 2009. All Rights Reserved.
  • Page 10 <DECREMENT> = [05h, 00h], <EXECUTE> = [06h, 00h] Refer to the Communication command table (&above). [Type] [Setting code] 9 ～ 12 RS-232C Communication / Network command For byte number , refer to table (&17). © 3M 2009. All Rights Reserved.
  • Page 11 • When the data length is greater than indicated by the data length code, the projector ignore the excess data code. Conversely when the data length is shorter than indicated by the data length code, the projector returns the error code to the computer. © 3M 2009. All Rights Reserved.
  • Page 12 Use the cable that fulfi lls the specifi cation shown in fi gure (Use CAT-5 or greater LAN Cable when LAN ports are used ) Turn the computer on, and after the computer has started up turn the projector on. LAN cable (CAT-5 or greater) © 3M 2009. All Rights Reserved.
  • Page 13 Authentication Enter the desired authentication password. Password This setting will be the same for [Network Network Control Control Port1 (Port: 23)] and [Network Re-enter Control Port2 (Port: 9715)]. Authentication Default setting is blank. Password © 3M 2009. All Rights Reserved.

  • Page 14: Command Control Settings

    NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • Commands are not accepted during warm-up. © 3M 2009. All Rights Reserved.
  • Page 15 Otherwise, an authentication error will be returned. NOTE • As for the transmission of the second or subsequent commands, the authentication data can be omitted when the same connection. © 3M 2009. All Rights Reserved.
  • Page 16 RS-232C cable. Turn the computer on, and after the computer has started up turn the projector Set the COMMUNICATION TYPE to NETWORK BRIDGE. (&OPTION menu - SERVICE - COMMUNICATION in the Operator's Guide) CONTROL RS-232C © 3M 2009. All Rights Reserved.

  • Page 17: Communication Settings

    • Turn off (the power of ) both the projector and other devices and unplug , beore connecting them. • For details of Transmission method, refer to 3.8.4 Transmission method- Network Guide. © 3M 2009. All Rights Reserved.
  • Page 18 00 00 Decrement BE EF 06 00 4A D2 05 00 04 20 00 00 CONTRAST Reset Execute BE EF 06 00 A4 D2 06 00 01 70 00 00 (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 19 BE EF 06 00 37 FF 05 00 96 30 00 00 User Gamma Point 7 Reset Execute BE EF 06 00 D0 C2 06 00 56 70 00 00 (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 20 BE EF 06 00 0B F5 05 00 B7 30 00 00 COLOR TEMP Execute BE EF 06 00 C8 C5 06 00 4C 70 00 00 OFFSET B Reset (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 21 03 21 00 00 Increment BE EF 06 00 2F 83 04 00 03 21 00 00 Decrement BE EF 06 00 FE 82 05 00 03 21 00 00 (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 22 03 00 SYNC ON G OFF BE EF 06 00 A2 D6 01 00 11 20 02 00 BE EF 06 00 F1 D7 02 00 11 20 00 00 (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 23 00 00 COMPUTER IN1 Increment BE EF 06 00 AB CC 04 00 60 20 00 00 Decrement BE EF 06 00 7A CD 05 00 60 20 00 00 (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 24 01 00 31 20 03 00 BE EF 06 00 02 DC 01 00 31 20 00 00 BE EF 06 00 31 DC 02 00 31 20 00 00 (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 25 Decrement BE EF 06 00 F7 D6 05 00 16 30 00 00 MENU POSITION V Execute BE EF 06 00 A8 C7 06 00 44 70 00 00 Reset (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 26 01 00 20 31 00 00 BE EF 06 00 AB 88 01 00 20 31 01 00 BE EF 06 00 08 89 02 00 20 31 00 00 (continued on next page) © 3M 2009. All Rights Reserved.
  • Page 27 06 00 FF 3D 01 00 30 26 00 00 NORMAL BE EF 06 00 6F 3C 01 00 30 26 01 00 BE EF 06 00 CC 3D 02 00 30 26 00 00 © 3M 2009. All Rights Reserved.
  • Page 28 MY IMAGE IMAGE-3 Execute BE EF 06 00 C9 C2 06 00 03 35 00 00 Delete MY IMAGE IMAGE-4 Execute BE EF 06 00 BD C3 06 00 04 35 00 00 Delete © 3M 2009. All Rights Reserved.
  • Page 29 31 = AV Mute on 10 = BLANK off 11 = BLANK on 20 = Mute off AVMT ? AV Mute inquiry 21 = Mute on 30 = AV Mute off 31 = AV Mute on © 3M 2009. All Rights Reserved.
  • Page 30 Web Brouwser Comtrol. To use PJLink without authentication, do not set any password in Web Browser Control. • For specifications of PJLink , see the web site of the Japan Business Machine and Information System Industries Association. URL: http://pjlink.jbmia.or.jp/ © 3M 2009. All Rights Reserved.

This manual is also suitable for:

X35n