Download
Share
Print this page
3M X3li Operator's Manual
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Projector
  5. X3li
  6. Operator's manual
3M X3li Operator's Manual

3M X3li Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Digital Projector X31i/X36i/X46i/WX36i
Operator's Guide
TECHNICAL
Warranty
3M warrants that when the 3M Product is used according to 3M's Intended Use
Statement (www.3M.com/meetings), it will perform satisfactorily for the warranted
durability period as stated in the applicable 3M Product Manual in effect at the
time of purchase. The warranties stated in the applicable 3M Product Manuals
are exclusive and are made in place of any and all express or implied warranties
or conditions, including any implied warranty of merchantability or fitness for a
particular purpose, or any industry practice or custom or trade usage.
Important Notice
All statements, technical information, and recommendations related to 3M's
products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate it
and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product
which are not contained in 3M's current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly

Advertisement

loading
Need help?

Need help?

Do you have a question about the X3li and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for 3M X3li

Summary of Contents for 3M X3li

  • Page 1 Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M’s Intended Use Statement (www.3M.com/meetings), it will perform satisfactorily for the warranted durability period as stated in the applicable 3M Product Manual in effect at the time of purchase.

  • Page 2: Example Of Computer Signal

    1680 x 1050 65.3 60.0 VESA WSXGA+ (60Hz) 1600 x 1200 75.0 60.0 VESA UXGA (60Hz) *1) Supported except for HDMI input. *2) Only for X31i/X36i/X46i. *3) Only for WX36i. NOTE display pixels above. © 3M 2012. All Rights Reserved.
  • Page 3 SXGA (75Hz) 1280 x 1024 1024 SXGA (85Hz) 1400 x 1050 11.4 1050 SXGA+ (60Hz) 1440 x 900 13.5 WXGA+ (60Hz) 1680 x 1050 11.5 1050 WSXGA+ (60Hz) 1600 x 1200 1200 UXGA (60Hz) © 3M 2012. All Rights Reserved.
  • Page 4 Connection to the ports Important Note AUDIO IN AUDIO OUT COMPUTER IN1, COMPUTER IN2, MONITOR OUT Y, Analog, Analog, r/Pr, Analog, Signal Signal Video Green, Y 10 Ground Ground Ground Green, Ground Y 14 V. sync., © 3M 2012. All Rights Reserved.
  • Page 5 19 17 15 13 11 Signal Signal Signal T.M.D.S. Data2 + T.M.D.S. Data0 Shield T.M.D.S. Data2 Shield 16 SDA T.M.D.S. Data1 + 18 +5V Power T.M.D.S. Data1 Shield 19 Hot Plug Detect T.M.D.S. Data0 + © 3M 2012. All Rights Reserved.
  • Page 6 3M™ Digital Projector X31i/X36i/X46i/WX36i Connection to the ports (continued) AUDIO IN AUDIO OUT AUDIO IN1, AUDIO IN2 AUDIO IN3 AUDIO OUT © 3M 2012. All Rights Reserved.
  • Page 7 5 4 3 2 1 please refer to the next chapter. Signal Signal Signal Ground USB TYPE A USB TYPE B Signal Signal + Data + Data Ground Ground Signal Signal Signal 1 TX+ 3 RX+ © 3M 2012. All Rights Reserved.
  • Page 8 To input component video signal to the COMPUTER IN1 or COMPUTER IN2 port For the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN1 or COMPUTER IN2 port ( © 3M 2012. All Rights Reserved.

  • Page 9: Control Port

    CONTROL RS-232C Cable (cross) CONTROL port of the computer 9 8 7 5 4 3 2 1 RD(2) (2) RD TD (3) (3) TD DTR (4) DSR (6) RTS (7) (7) RTS RI (9) © 3M 2012. All Rights Reserved.

  • Page 10: Communication Settings

    For byte number refer to table ( [Action] Set functional code to byte number 7, 8. <SET < Refer command table above. [Type], [Setting code] 9 12 command For byte number , refer to table ( © 3M 2012. All Rights Reserved.
  • Page 11 2 bytes of data. NOTE manual for each devices, and connect them correctly with suitable cables. command or data. code. when the lamp is lit. Ignore this data. code to the computer. © 3M 2012. All Rights Reserved.

  • Page 12: Usb Type A Port

    3M™ Digital Projector X31i/X36i/X46i/WX36i Command Control via the Network command table ( 17). NOTE Connection USB TYPE A port. Turn the computer on, and after the computer has started up turn the LAN cable (CAT-5 or greater) © 3M 2012. All Rights Reserved.
  • Page 13 Security Settings Authentication Enter the desired authentication password. Password This setting will be the same for [Network Network Control Control Port1 (Port: 23)] and [Network Control Port2 (Port: 9715)]. Authentication Default setting is blank. Password © 3M 2012. All Rights Reserved.

  • Page 14: Command Control Settings

    This is the value to make zero on the addition of the lower 8 bits from the header to the checksum. [Connection ID] Random value from 0 to 255 (This value is attached to the reply data). NOTE code. © 3M 2012. All Rights Reserved.

  • Page 15: Response Code / Error Code

    6) When the sending data is correct, the command will be performed and the reply data will be returned. Otherwise, an authentication error will be returned. NOTE for this connection, the authentication data can be omitted. © 3M 2012. All Rights Reserved.
  • Page 16 USB TYPE A port. CONTROL Turn the computer on, and after the computer has started up turn the OPTION menu - SERVICE - COMMUNICATION in the Operator's Guide) LAN cable (CAT-5 or greater) RS-232C CONTROL © 3M 2012. All Rights Reserved.
  • Page 17 Start bit Stop bit Transmission method NOTE manual for each device, and connect them correctly with suitable cables. connecting them. For details of Transmission method, refer to 6.4 Transmission method in the Network Guide. © 3M 2012. All Rights Reserved.
  • Page 18 [Example return] 00 00 01 00 04 00 10 00 05 00 [Normal] [Cinema] [Dynamic] [Custom] [PHOTO] 20 00 21 00 22 00 40 00 [BOARD(BLACK)] [BOARD(GREEN)] [WHITEBOARD] [DAY TIME] (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 19 BE EF 06 00 8F FE 05 00 94 30 00 00 User Gamma Point 5 Reset Execute BE EF 06 00 68 C3 06 00 54 70 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 20 BE EF 06 00 B3 F4 05 00 B5 30 00 00 COLOR TEMP Execute BE EF 06 00 40 C5 06 00 4A 70 00 00 OFFSET R Reset (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 21 06 00 BA 82 05 00 00 21 00 00 V POSITION Reset Execute BE EF 06 00 E0 D2 06 00 02 70 00 00 (*) only for WX36i (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 22 13 22 01 00 HDMI FORMAT COMPUTER BE EF 06 00 DA 76 01 00 13 22 02 00 BE EF 06 00 89 77 02 00 13 22 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 23 04 00 MONITOR OUT - BE EF 06 00 FE B4 01 00 B4 20 FF 00 COMPUTER IN2 BE EF 06 00 3D F5 02 00 B4 20 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 24 00 00 VOLUME - LAN Increment BE EF 06 00 8F CE 04 00 6B 20 00 00 Decrement BE EF 06 00 5E CF 05 00 6B 20 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 25 01 00 31 20 03 00 VIDEO BE EF 06 00 02 DC 01 00 31 20 00 00 BE EF 06 00 31 DC 02 00 31 20 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 26 02 00 A2 20 00 00 Increment BE EF 06 00 13 F1 04 00 A2 20 00 00 Decrement BE EF 06 00 05 00 A2 20 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 27 Decrement BE EF 06 00 F7 D6 05 00 16 30 00 00 MENU POSITION V Execute BE EF 06 00 A8 C7 06 00 44 70 00 00 Reset (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 28 01 00 02 37 03 00 BE EF 06 00 82 61 01 00 02 37 04 00 BE EF 06 00 71 63 02 00 02 37 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 29 01 00 00 36 22 00 MESSENGER BE EF 06 00 AA 29 01 00 00 36 25 00 BE EF 06 00 09 33 02 00 00 36 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 30 01 00 01 36 22 00 MESSENGER BE EF 06 00 56 28 01 00 01 36 25 00 BE EF 06 00 F5 32 02 00 01 36 00 00 (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 31 02 00 50 20 00 00 VOLUME - ALL Increment BE EF 06 00 AB C3 04 00 50 20 00 00 Decrement BE EF 06 00 7A C2 05 00 50 20 00 00 © 3M 2012. All Rights Reserved.
  • Page 32 3M™ Digital Projector X31i/X36i/X46i/WX36i PJLink command Parameter or Response POWR POWR ? Power Status inquiry Input Source selection Input Source inquiry AVMT AV Mute AVMT ? AV Mute inquiry (continued on next page) © 3M 2012. All Rights Reserved.
  • Page 33 Responds with the factory information and so Other Information inquiry NOTE is the same as the password set in without authentication, do not set , see the web site of the Japan Business Machine and Information System Industries Association. © 3M 2012. All Rights Reserved.
  • Page 34 137 137 150 129 165 165 181 154 208 206 227 193 278 274 108 304 257 101 349 343 135 381 322 127 354 10.7 420 411 162 386 11.6 458 386 152 © 3M 2012. All Rights Reserved.
  • Page 35 11.0 434 13.3 524 448 176 The values shown in the table are calculated for a full size screen. a Screen size (diagonal) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling © 3M 2012. All Rights Reserved.

This manual is also suitable for:

X36iX46iWx36iX31i