Advertisement
Quick Links
Installation and Operating Instructions
Alpha Electric Flat Plate BBQ model
IMPORTANT: READ THIS DOCUMENT THOROUGHLY BEFORE USING
YOUR SOVEREIGN BBQ.
IMPORTANT: REMOVE ALL PACKING MATERIAL AND LITERATURE
FROM YOUR BBQ BEFORE USE.
Thankyou and congratulations for choosing a quality Sovereign BBQ for all your cooking and
entertainment needs.
By following these instructions for safe and easy operation, you will enjoy years of satisfying,
trouble free cooking.
SAFETY
1) Read all instructions carefully before operating.
2) This BBQ requires a protected electrical supply of 220 -240 Volts AC.
3) To protect against electrical shock, do not immerse the temperature controller, plug or lead
in water or other liquids.
4) Do not operate BBQ if the plug or lead is damaged or malfunctions. Return the product to
your nearest authorised service facility for inspection or repair.
5) Do not touch hot surfaces, use protective gloves and/or handles instead.
6) Do not transport the BBQ whilst hot, or when it contains hot oil or other hot liquids.
7) Always insert the temperature controller into the BBQ first, then plug the lead into the
power supply outlet. To disconnect, turn the temperature control device to the "min/off"
position, then remove the plug and lead from the power supply outlet. Remove by grasping
the plug itself – do not pull the cord.
8) Any modification of the BBQ, temperature controller or lead may be dangerous. Do not
attempt any such modifications.
9) Remove temperature controller when not in use to prevent contact with water.
10) Attach weather cap when controller is removed.
11) When in use, open the BBQ lid with the handle only. Surfaces will become hot, therefore
use caution at all times.
12) Close supervision is necessary when the BBQ is used by or near children. Do not leave
children unattended whilst the appliance is in use.
Sovereign BBQs & Grills Australia
PO Box 751, Beenleigh Queensland Australia 4207
Ph: (+617) 3382 0230
Fax: (+617) 3382 0087
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sovereign Alpha Electric Flat Plate BBQ
Summary of Contents for Sovereign Alpha Electric Flat Plate BBQ
- Page 1 IMPORTANT: REMOVE ALL PACKING MATERIAL AND LITERATURE FROM YOUR BBQ BEFORE USE. Thankyou and congratulations for choosing a quality Sovereign BBQ for all your cooking and entertainment needs. By following these instructions for safe and easy operation, you will enjoy years of satisfying, trouble free cooking.
-
Page 2: Installation
100mm sides, 200mm front & rear, 50mm bottom, 1200mm above. Keep this BBQ away from flammable materials. Mounting Options Your Sovereign BBQ can be mounted from the front, centre or rear using either standard or custom made fittings to suit your nominated installation location. As outlined above, Sovereign BBQs manufacture a range of standard mounting options for both rail and deck mounting marine installations. - Page 3 All front mounting options (whether rail or deck orientated) locate/slide into a dedicated recess at the front two (2) corners of your chosen Sovereign BBQ model (140mm in depth). For installation purposes, the front mounting centres for the Alpha Model is 523mm. As for...
- Page 4 You will note that on the underside of all Sovereign BBQs, towards the rear, a telescopic rod attachment point is provided to allow attachment of the telescopic rod (standard or custom) without any holes or penetrations needing to be made to the sealed bottom base compartment of your BBQ.
- Page 5 BBQ. If the plug and or lead is damaged, it must be replaced with an approved Sovereign BBQs temperature controller. Please note that the supplied temperature controller is uniquely engineered to suit this appliance and should not be replaced with any other controller model despite if they are similar in appearance.
- Page 6 1. Turn the temperature controller knob in a clockwise direction and set to the desired heat. 2. For optimal performance, Sovereign BBQs recommends pre-heating your appliance for a short period.
-
Page 7: To Turn Off
Careful handling of the BBQ plate is required to ensure safe removal and re-insertion as required for cleaning and maintenance. Please refer to the following photos for further information. Sovereign BBQs & Grills Australia PO Box 751, Beenleigh Queensland Australia 4207 Ph: (+617) 3382 0230... - Page 8 We recommend a very small application of Inox (or a similar anti corrosion lubricant) on the element terminal ends on a periodical basis (every 6 months). Sovereign BBQs & Grills Australia PO Box 751, Beenleigh Queensland Australia 4207 Ph: (+617) 3382 0230...
- Page 9 BBQ checked immediately by a qualified technician. Do not remove or modify any electrical components on this appliance in any way. ALPHA ELECTRIC FLAT PLATE BBQ – OVERVIEW Lid Locking Screw Removable Temperature...
- Page 10 The “Installation and Operating Instructions” are provided on the understanding that: Sovereign BBQs are not responsible for the results of any actions taken relying on the information in these instructions, or for any error in or omission from these instructions.
Need help?
Do you have a question about the Alpha Electric Flat Plate BBQ and is the answer not in the manual?
Questions and answers