Carrier G Series Cooling Owner's Manual page 20

UNIT OPERAT I O N
Sleep Ti m e r
This function enables the user to automatically switch off the unit.
A
ON/OFF
SLEEP
SLEEP
¶U When the SLEEP timer is set, the luminosity of the unit lamps will be dimmed so as not to interrupt the sleep.
¶U The SLEEP timer can be combined with the ON timer. ( Refer to p.16 for combination )
SLEEP
®Á
.
TEMP
P R O C E D U R E
If you want to stop the operation after 3 hours from now,
1
Press the SLEEP button 3 times
¶U3:hr will be displayed and the
f l a s h i n g .
¶UAfter 5 seconds, the stopping time will be displayed.
¶UThe unit operates in sleep mode for 3 hours and will
switch off at the end of the 3 hours.
¶UTo change the reserved time or to cancel, press the
SLEEP Button again.
1:hr °Ê 2:hr °Ê 3:hr °Ê 7:hr °Ê 9:hr °Ê C a n c e l
2
When the SLEEP Timer is set, the unit will control the
set temperature to avoid overcooling in Cool
or Dry operation.
Set temperature is changed as shown below.
°...
S E T
T E M P .
SET TIME
( For Cooling or Dry mode )
N O T E
O W N E R°Ø S MANUAL - 1 8
signal will be
SLEEP
+ 0 . 5°...
+ 0 . 5°...
+ 0 . 5°...
+ 0 . 5°...
T I M E ( M I N . )
70 110 150
30