Zte Altair 2 User Manual page 5

Inserting the SIM card
Note: You can obtain a SIM card from your service provider when you sign on
as a subscriber.
Caution:
• Do not bend, scratch, or touch the metal contacts of your SIM card.
• Keep the card away from electrical appliances and magnets.
• Disconnect the charger and other accessories from your phone and
remove the battery before inserting or removing the SIM card. Failing to do
so could cause information on the card to be lost or destroyed.
1. Hold the Power key to power off the phone.
2. Remove the back cover and battery.
3. Insert the SIM card into the card slot with the cut corner facing outward as
shown below. Insert the card into the card holder and push it until it clicks
into position. Make sure that the SIM card is fully seated in the slot.
4. Reinsert the battery and replace the back cover.
2
Removing the SIM card
1. Hold the Power key to power off the phone.
2. Remove the back cover and battery.
3. Gently remove the SIM card from the card slot.
Inserting a microSD
Note: This phone can support a memory card (not included) with a capacity
of up to 32 GB.
1. Hold the Power key to power off the phone.
2. Remove the back cover and battery.
3. Insert the microSD card carefully with the metal contacts facing downward
as shown. Make sure that the card is fully seated in the slot.
4. Reinsert the battery and replace the back cover.
Caution: Do not attempt to use memory cards other than microSD cards with
this phone. Attempting to use non-compatible memory cards might cause
loss of data or damage to the phone, and may void your Warranty.
GETTING STARTED GETTING STARTED
card
™
3