Trip Computer - Alfa Romeo MiTo Owner's Manual

42
Courtesy lights (Activation/deactivation of
"Courtesy lights") (where provided)
This function allows the side lights, number plate lights and inter-
nal courtesy lights to be lit up for approximately 25 seconds when
the doors or luggage compartment are opened using the remote
control, with the following exceptions:
❍ interruption after 5 seconds following doors closure
❍ interruption following a locking operation using the remote con-
trol
❍ interruption following any operation using the remote control
To activate / deactivate this function, proceed as follows:
– briefly press MENU ESC: "On" or "Off" will flash on the dis-
play (according to previous setting);
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
Exit Menu
This is the last function that closes the setting cycle listed in the ini-
tial menu screen. Briefly press MENU ESC to go back to the stan-
dard screen without storing new settings. Press – to return to the
first menu item.
GETTING TO KNOW YOUR CAR

TRIP COMPUTER

GENERAL FEATURES
The "Trip computer" is used to display information on car opera-
tion when the key is turned to MAR. This function allows you to
define two separate trips called "Trip A" and "Trip B" to monitor
the car's complete mission (trip) in a mutually independent man-
ner. Both functions can be reset (reset - start of new mission).
"Trip A" can be used to display figures relating to:
– Range
– Distance travelled
– Average fuel consumption
– Instantaneous fuel consumption
– Average speed
– Travel time (driving time).
The "Trip B" function is used to display information relating to:
– Distance travelled B
– Average fuel consumption B
– Average speed B
– Travel time B (driving time).
"Trip B" functions may be excluded (see paragraph on "Trip B on").
"Range" and "Instantaneous fuel consumption" cannot be reset.