Alfa Romeo MiTo Owner's Manual page 215

214
Replacing the windscreen wiper blades
Proceed as follows:
❍ lift the windscreen wiper arm and position the blade so that it
forms an angle of 90° with the arm;
❍ press tabs (one on each side) A-fig. 5 on the attachment clip
and remove the blade from the arm;
❍ fit the new blade, inserting the tab into the dedicated housing
in the arm. Make sure that the new blade is secured in posi-
tion.
Replacing the rearscreen wiper blade
Proceed as follows:
❍ lift cover A-fig. 6, undo nut B and remove arm C;
❍ position the new arm, fully tighten nut B and then lower
cover A.
fig. 5
CARE AND MAINTENANCE
SPRAY NOZZLES
Windscreen washer fig. 7
The windscreen washer jets are fixed.
A0J0054m
fig. 6
fig. 7
A0J0057m
A0J0053m