Playback Features; Basic Recording; Adjusting Tracking Condition; Tracking Adjustment - JVC HR-J6009UM Instructions Manual

– Playback –

Playback Features

Adjusting tracking condition

– Tracking Adjustment

Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the signal
to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET –/+ on the Remote to eliminate the
noises. Press it briefly for a fine adjustment, or press and
hold for a coarse adjustment.
• Press SP/EP on the Remote to reactivate automatic tracking.
Playing back tape repeatedly
– Auto Repeat Play
1 Access Menu screen
Press MENU on the Remote.
Press SET –/+ to select "AUTO
REPEAT".
Select ON/OFF
2
Press ENTER to select "ON" or
"OFF".
Press MENU to return to normal
screen.
Start Auto Repeat Play
3
Press PLAY. The tape will play
over and over until the repeat
mode is canceled.
4F22001AE 08-Back
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
ON OFF
CH SET UP
SAP ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
+/–/ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
+/–/ENTER/MENU
8
Recording
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record safety tab.
To record on it later, cover the hole
with adhesive tape.

Basic Recording

1
Load a cassette
Make sure the record safety tab is
intact. If not, cover the hole with
adhesive tape before inserting the
cassette.
• The VCR turns on, and the counter
is reset, automatically.
2
Select recording channel
Press CH–/+ or the Number keys on
the Remote [CH–/+ on the VCR].
• If you connect the TV and the VCR
only using the RF connection, press
TV/VCR on the Remote so that the
VCR mode indicator lights on the display panel, to view the
program to be recorded.
3
Set tape speed
Press SP/EP.
4
Start recording
On the VCR, press REC. Or on the
Remote, while holding REC, press
PLAY ( ).
During recording
Pause recording
Press PAUSE.
• Press PAUSE to resume recording.
• You can select channel in the
recording pause mode.
Stop recording
Press STOP ( ) on the
Remote.
16/01/2002, 19:06
Record safety tab
CH 001
00 : 00 : 00 SP
CH 110
OR Press STOP/EJECT
( / ) on the VCR.