Eiki LC-XlU Owner's Instruction Manual page 25

REMOTE CONTROL BATTERY INSTALLATION
The remote control unit~ can be used as wireless or wired remote control.
USING THE REMOTE CONTROL UNIT (wireless)
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating
range for the remote control is about 16.4' (5m) and
USING THE REMOTE CONTROL UNIT (wired)
Connect a remote control cable to R/C jacks located
projector.
To insure safe operation, please observe the following
precautions:
• Use (2) AA type alkaline batteries.
• Change two
• Do not use a new battery with a used battery.
• Avoid contact with water.
• Do not drop the remote control unit.
batteries have leaked on the remote control,
• If
carefully wipe the case clean and load new batteries.
batteries at the same time.
0 front and rear of the projector.
60
on
the wireless/wired remote control unit and the side of the