Table of Contents
Advertisement
Remote Operation Using Wi-Fi Remote
After completing the necessary preparations (A 50) you can adjust the aperture value remotely from a Wi-Fi-
enabled device using the Wi-Fi Remote application.
1 Press the current aperture value on the Wi-Fi Remote screen.
2 Select the desired aperture value from the list.
• You may need to scroll up/down to see all the available values.
• Alternatively, you can press IRIS [+] to open the aperture or IRIS [-] to close the aperture in 1/8-stop
increments. (Onscreen displays will show the closest 1/3-stop aperture value.)
• The selected value will be displayed on the Wi-Fi Remote screen and will be applied on the lens.
NOTES
• When using an EF lens with no lens contacts, such as a Canon Cinema Lens, you cannot adjust the aperture
using the camera. Adjust the aperture using the lens.
• When using an EF lens that can correct the aperture value according to the position of the zoom, you can use
the [~ Camera Setup] > [Iris] > [Zoom-Iris Correct.] setting to activate this correction.
• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the aperture with
the remote controller's IRIS dial. By default, turn the dial right to open up the aperture (smaller F value) and left
to close the aperture (larger F value).
2 Adjusting the Aperture
75
Advertisement
Table of Contents
