Integrated socket
This appliance is equipped with a
socket for connecting a washer
without fuses. Only the listed
washer may be connected. For all
other connections Bosch will
assume no liability.
d
CAUTION
Use copper conducters only.
Connect to a 30 A minimum
individual branch circuit, fused at
30 A maximum.
Use receptable only for:
208 - 240 VAC 60 Hz 11 A
washer: WFR2460UC,
WFL2060UC, WAE20060UC,
WAS20160UC, WAS24460UC.
10
Condensate hose
connection
The dryer must have its condensate
drain line installed and run to a
suitable drain.
The connection for the condensate
hose is located on the back of the
d
dryer.Connect the condensate
drain hose to the dryer. The other
end should then be placed and
secured at nearby sink or drain.If
installed with a washer it may, room
permitting, be installed next to the
washer drain hose and drained to
the same drain used by the washer.
Be sure to follow all local codes and
regulations in running the
condensate to a suitable drain.