NETGEAR EX2700 Installation Manual page 15

When the wireless device connects through the extender to your router,
the MAC address of the wireless device shown on the router is translated
to another MAC address. If your router's MAC filter is enabled, the wireless
device connects to the extender but cannot get an IP address from the
extender and cannot access the Internet.
To allow the wireless device to receive an IP address from the extender
and access the Internet, you must provide the translated MAC address to
the router.
1. Disable the MAC filter on your router.
2. Power on the extender and connect all of your wireless devices to the
extender network.
3. Make sure that the Router Link LED remains lit.
4. Launch a web browser and in the address field, enter
www.mywifiext.net or www.mywifiext.com.
A login screen displays.
5. Enter admin for the user name and password for the password.
6. Select Attached Devices.
The Attached Devices screen displays the MAC addresses for
computers and devices that are connected to the extender network.
7. Add any MAC addresses that begin with 02:0F:B5 to your router's
MAC filter table.
15