Portaholder™ Installation - Baratza Preciso Operation Manual

pulse button (see photo). Push and hold the pulse button to grind. Grinding will
stop when the button is released.
Note:
It is important that the espresso basket is held below the discharge chute so
the coffee powder can fall freely into the basket. Holding the basket up tight to
the discharge chute will cause coffee to back up and jam your grinder.
PortaHolder™ Installation
Insert the PortaHolder™ into the grinder. Then insert your portafilter into the
PortaHolder™ by tipping the basket down so the lip of the portafilter slides
under and gets hooked by the hook bracket at the top rear of the PortaHolder™
while the base of the basket is supported by the two metal fingers that extend
from the PortaHolder™. If the portafilter basket is not horizontal in the holder,
remove the screw and move the bracket higher or lower in order to level the
portafilter basket.
To use, insert your porta filter into the PortaHolder™. Turn the timer to the
desired time. The grinder will run for the time set and stop automatically.
Note:
Use caution not to overfill the portafilter. If you overfill the filter, coffee will
back up and jam your grinder.
Preciso Manual
TM
12