Front Mounted Pulse Button; Portaholder ™ Installation - Baratza Preciso Operation Manual

Front Mounted Pulse Button

For short duration grinding, the PRECISO is
equipped with a front mounted pulse button. It can
be used for grinding directly into an espresso-brew-
ing basket. Remove the grounds bin and position
the espresso-basket inside the grinder directly
below the pulse button or position the espresso
basket in the Portaholder which is included (see
photo). Push and hold the pulse button to grind.
Grinding will stop when the button is released.
PortaHolder Installation
™
Insert the PortaHolder into the grinder. Then in-
™
sert your porta filter into the PortaHolder by tipping
™
the basket down so the lip of the porta filter slides
under and gets hooked by the hook bracket at the
top rear of the PortaHolder while the base of the
™
basket is supported by the two metal fingers that
extend from the PortaHolder If the porta filter bas-
™
ket is not horizontal in the holder, remove the screw
and move the bracket higher or lower in order to
level the portafilter basket.
To use, insert your porta filter into the PortaHold-
er . Turn the timer to the desired time. The grinder
™
will run for the time set and stop automatically.
Note:
Use caution not to overfill the porta filter. If you overfill the filter coffee will
back up and jam your grinder.
7