Operation; Before Using Your Grinder; Duty Cycle; Hopper Installation - Baratza SETTE 30 Manual

Hide thumbs Also See for SETTE 30:

Table of Contents

SETTE™ 30 MANUAL

OPERATION

Prior to using your Sette grinder for the first time, you should wash the bean hopper and grounds bin in warm soapy water.

Do not wash the grind adjustment assembly or burr. See the section on Care and Cleaning for instruction on how

to remove and reinstall these parts. Place the Sette on a level surface and plug the power cord into the back port on the

machine. Plug the cord into a correct voltage AC outlet only. There may be some rust on the burrs when you receive your

grinder. This is normal and will disappear after a small amount of coffee has been ground. To remove the rust and season

the burrs, grind a handful of beans (~40g) on setting 15 and discard. This begins the burr seasoning process and primes

the grinder for normal operation.

The Sette was designed for a maximum of 2 lbs (1 kg) per day, with an espresso duty cycle of 10%. We want to remind

everyone buying the Sette grinder that it was designed for home use (short duration grinding).

Here is a general overview of the duty cycle of the Sette Series:

Espresso (Setting ~10) it will take about 6 seconds to grind a dose of espresso, then the grinder should rest for 60

seconds. This is about what you could do if making back-to-back shots on a one-group machine.

Brew (Setting ~25) it will take 5 to 30 seconds to grind up to 150 grams of coffee, then the grinder should rest for 60

seconds. Remember, a maximum of 150 grams at one time, with a 1 minute off before grinding again.

The duty cycles described above will work great for home brewing. If you choose to use it in a commercial situation, please

think about the Sette's duty cycle function and decide if this will be a successful choice for your bar setup.

With the hopper lid in place, mount the hopper by lining up the hopper's bean shutoff knob at the 11:00 position (back left).

Press the hopper down, and rotate clockwise until the alignment tabs on the front are aligned. Flip the bean shutoff knob to

the "open" position and pour in desired quantity of roasted, whole coffee beans.

May 2019 (v3)

Table of Contents

Show Quick Links

Table of Contents

Sette 30