Securing Your Child - Britax Frontier Owner's Manual

WARNING:
Harness Mode
• Never route the vehicle belt over the child when using this child seat
in harness mode.
• Adjust the belts provided with this child seat so they fit snugly
around your child. A snug strap should not allow any slack. It lies in a
relatively straight line without sagging. It does not press on the child's
flesh or push the child's body into an unnatural position.
• The HUGS™ chest pads must be used at all times.
• Adjust the harness to fit the clothes the child is wearing. Remove
bulky coats and/or jackets before putting the child in the child seat.
• Verify that the child seat is secure and the harness is properly adjusted
around the child each time the child seat is used.
Harness Mode
IMPORTANT:
Before securing your child in the child seat, always check the
seat area for debris and remove it to prevent interference with the harness
adjuster mechanism.
1
Loosen the harness.

Securing Your Child

2
Open the chest clip.
1 Press tabs
2 Pull apart
39