Wireless network
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a
WLAN. You can also configure network settings.
Connecting to a WLAN
1
On the Mode screen, select Wi-Fi.
2
Select
,
,
,
, or
3
Follow the on-screen instructions until the Wi-Fi Setting screen
appears.
•
In some modes, press [m], and then select Wi-Fi Setting.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Wi-Fi Setting
Refresh
Samsung1
Samsung2
Samsung3
Back
•
Select Refresh to refresh the list of connectable APs.
•
Select Add wireless network to add an AP manually. The AP name
must be in English to add the AP manually.
.
Icon
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [F] or touch
to open network setting options.
•
When you select a secured AP, a pop-up window appears. Enter the
required passwords to connect to the WLAN. For information about
entering text, refer to "Entering text". (p. 122)
•
When a login page appears, refer to "Using the login browser".
(p. 120)
•
When you select an unsecured AP, the camera will connect to the
WLAN.
•
If you select a WPS profile supported AP, select
connection, and then enter a PIN on the AP device. You can also
connect to a WPS profile supported AP by selecting
button connection on the camera, and then pushing the WPS
button on the AP device.
•
If a pop-up message about data collection regulations appears,
read and agree to it.
WPS PIN
WPS
118