Connecting To A Wlan And Configuring Network Settings; Connecting To A Wlan - Samsung NX3000 User Manual

Wireless network

Connecting to a WLAN and configuring network settings

Learn to connect via an access point (AP) when you are in a range of a
WLAN. You can also configure network settings.

Connecting to a WLAN

1
Rotate the mode dial to B.
2
Select , , or .
3
Follow the on-screen instructions until the Wi-Fi Setting screen
appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Wi-Fi Setting
Refresh
Samsung1
Samsung2
Samsung3
Back Manual
•
Select Refresh to refresh the list of connectable APs.
•
Select Add wireless network to add an AP manually. The AP name
must be in English to add the AP manually.
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
•
Press [F] to open network setting options.
•
When you select a secured AP, a pop-up window appears. Enter the
required passwords to connect to the WLAN. For information about
entering text, refer to "Entering text". (p. 117)
•
When you select an unsecured AP, the camera will connect to the
WLAN.
•
If you select a WPS profile supported AP, select WPS PIN
connection, and then enter a PIN on the AP device. You can also
connect to a WPS profile supported AP by selecting WPS button
connection on the camera, and then pushing the WPS button on
the AP device.
•
If a pop-up message about data collection regulations appears,
read and agree to it.
114