Installation Instructions; Installing The Hardware - Hama DR-20 Instruction Manual

Instruction Manual for DR-20 DSL/Broadband Router

Installation instructions:

Before you begin, make sure that you have received your DSL user data from your Internet
provider. You also require an additional ADSL modem with an Ethernet connection.
Caution!
The external ADSL modem may not be a USB device; otherwise you cannot use our router will it!
In the box:
1x Hama DR-20 DSL/broadband router with integrated USB print server
1x Power supply unit
1x Driver CD-ROM
1x Assembly material for wall attachment
1x Operating instructions printout

1. Installing the Hardware

Using network cable, connect your external ADSL modem to the terminal with the name WAN at
the back of the DR-20 DSL/broadband router. Where possible, use a CAT 5 STP network cable to
ensure a smooth connection.
Connect the computer(s) that you would like to connect to the Internet using the router. Insert a
suitable network cable (patch or crossover cable CAT5 STP) in your network card on the PC and
connect the other end to the terminal with the numbers 1 – 4 at the rear of the DR-20
DSL/broadband router.
LED Status
WAN Illuminat
ed
Flashing Data transfer via WAN port
Off
LAN1-4 Illuminat
ed
Flashing Data transfer via respective LAN port
Off
USB Illuminat
ed
Off
POWER Illuminat
ed
Off
Plug the power unit supplied into an empty socket and connect it to the DR-20 DSL/broadband
router.
Caution:
Only use the power unit, which is supplied with the product.
09.6.2005
Explanation
The WAN port has generated a correct Internet connection
No connection
The corresponding LAN port has generated a correct network
connection
No connection
A USB device is connected
No USB device is connected or recognized
Power unit is connected and supplying electricity
No power unit connected, device not being supplied with
electricity
Seite 1
Art. Nr. 00049079