g Operating Instruction Contents: Connecting the Wireless LAN Router .........................Page 03 Configuring the operating system and computer......................Page 04 Configuring the Wireless LAN Router.........................Page 05 3.1 Configuring using the Wizard ............................Page 05 3.1.1 Time zone ................................Page 06 3.1.2 LAN settings ................................Page 06 3.1.3 Broadband connection (WAN Interface Setup) ....................Page 06 3.1.4 Wireless LAN basic settings..........................Page 06 3.1.5 Wireless LAN security settings (wireless security)..................Page 07...
Packet contents: 1x Hama Wireless LAN Router 54 Mbps 1x 12V power supply 1x printed operating instructions 1x configuration cable Remark concerning the positioning: The connection quality depends strongly on the place or surroundings where you put up the WLAN device. Please ensure that the device or its antennae are neither covered nor built in.
Checking Installation There are various status indicating LEDs on the top of the device: Condition Status Power Illuminated Power unit is connected and supplying electricity No power unit connected, device not being supplied with electricity WLAN Flashing Wireless LAN is activated / data is being sent Wireless LAN is deactivated Illuminated The WAN port has generated a correct network connection...
Select Optain an IP address automatically and Optain DNS server address automatically! Confirm by clicking OK, and again in the subsequent window. Your PC is now configured such that the router assigns the IP address automatically. You can then configure the router using the web browser.
3.1.1 Time zone The router can synchronize the time with a time server in the Internet. To do so, activate Enable NTP client update. Then select the correct time zone under Time Zone Select, for example „(GMT) London, Dublin, Lisbon“. Select an NTP server in Europe.
3.1.5 Wireless LAN security settings (wireless security) You can set the encryption for your wireless network here. Note that activating Wireless LAN without also setting encryption results in a security risk. For this reason, use one of the encryptions options described in the following. a) Encryption type WPA (Wi-Fi Protected Access) We recommend using encryption option WPA(TKIP), WPA2(AES), or WPA2 Mixed.
Page 8
From the start view, which you can access by clicking Home, select Setup and then WLAN/Basic Settings in the menu on the left. Wireless LAN is deactivated by default for security reasons. If you want to activate the function, uncheck Disable Wireless LAN Interface.
This page allows you to enter a new password for the router. Click Apply to confirm your entries. 4. Tools The Hama Wireless LAN router provides you with various tools to help you configure and use the device. 4.1 Configuration Tools From the start view which can be accessed by clicking Home, select Tools in the menu at the top right, and then Configuration Tools in the menu on the left.
6. Support and Contact Information If products are defective: Please contact your dealer or Hama Product Consulting if you have any product claims. Internet / World Wide Web: Product support, new drivers or product information can be found at www.hama.com Support Hotline –...
Page 14
Konformitetsförklaring enligt R&TTE riktlinje Τη δήλωση συμμόρφωσης σύμφωνα με την 99/5/EG finner du på www.hama.com οδηγία 99/5/EΚ περί R&TTE θα τη βρείτε στη διεύθυνση www.hama.com Software: (D) (GB) Dieses Gerät darf nur in den folgenden Ländern betrieben werden: (GB) The operation of this device is only allowed in the following countries: Cet appareil ne peut être utilisé...