PEERLESS PureFire PF-50 Installation, Operation & Maintenance Manual page 13

b. Figures 3.3 through 3.6 show approved sidewall
venting configurations using the standard fittings
supplied.
c. Figure 3.4 is only approved for locations in which
the outdoor temperature is above -5°F (-21°C) in
accordance with ASHRAE 90A-1980
recommendations.
d. Figures 3.7 shows an approved sidewall vent
configuration using an optional concentric vent
termination kit. 3" (54498) or 4" (54499).
Figure 3.3: Standard Exhaust & Air Inlet Pipe
Terminations
Figure 3.5: Exhaust and Air Inlet on Opposite Walls
VENTING & AIR INLET PIPING
Figure 3.4: Offset Exhaust and Air Inlet
Terminations
11