Bosch WFMC3200UC Training Manual page 22

22
Disassembly
Disassembly
To remove fascia panel to access control module & dispenser, remove (4) T-20 Torx
front/side screws and lift panel up.
fingernails or a sharp knife – take care not to scratch fascia panel or caps.
–
–
Fascia (Control) Panel (1)
Fascia (Control) Panel (1)
T-20 screws
Caps over screws can be removed using
When reassembling
panels, tuck rear
tabs under top
panel 1 st .
Knobs are permanently attached
to panels and cannot
removed.
1st Edition/Revision 6 (2/2/04)
be