Huawei E5836 Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Wireless Router
  5. E5836
  6. Manual

Huawei E5836 Manual

Mobile wi-fi
Hide thumbs

Advertisement

Table of Contents

Thank you for choosing the HUAWEI E5836 Mobile
Wi-Fi.
The supported functions and actual appearance are subject to your product purchased.
The following pictures are provided for illustration only. For details about your product
selection, consult your service provider's website.
This guide briefly describes the functions of the E5836. For details about how to set the
management parameters, see the Help section on the web management page.
If the E5836 is placed in an environment with poor ventilation, it will increase in
temperature after extended use. When the E5836 reaches a certain temperature, it will
switch off or disconnect from the network automatically to protect itself. In this case,
please move the E5836 to a well-ventilated place for heat dissipation and then restart
the E5836.

Advertisement

Table of Contents
loading

Related Manuals for Huawei E5836

Summary of Contents for Huawei E5836

  • Page 1 The following pictures are provided for illustration only. For details about your product selection, consult your service provider’s website. This guide briefly describes the functions of the E5836. For details about how to set the management parameters, see the Help section on the web management page.

  • Page 3: Getting To Know Your E5836

    Getting to Know Your E5836 Packing List The package box contains the following items. If any of the items is lost or damaged, contact your local dealer. Quick Start Guide Main unit Battery Safety Information...
  • Page 4 Data cable Charger Additional accessories can be purchased.

  • Page 5: Application Scenarios

    Application Scenarios The Wi-Fi device or computer can be connected to the Internet through the E5836. The actual connecting procedure depends on the operating system of the Wi-Fi device or computer. You can perform the connection operations as prompted. Scenario 1: Multi-device access via Wi-Fi...
  • Page 6 Scenario 2: Charging battery and accessing microSD storage via USB with continued multi-device access via Wi-Fi Game machine Smart phone Laptop Digital camera...
  • Page 7 Appearance Item Display screen microSD card slot Mini USB port Power button Wi-Fi/WPS button Connect Button Strap hole Battery button Wi-Fi: Wireless Fidelity WPS: Wi-Fi Protected Setup...
  • Page 8 Screen Item Signal strength Network Wi-Fi enabled Number of devices connected Internet connection enabled New messages Number of new messages Power level Roaming state M: Manual mode A: Auto mode...

  • Page 9: Before You Start

    Before You Start Installing the SIM Card and the Battery Install the SIM card at the card slot entrance. Ensure that the SIM card faces the direction as shown in the following figure. Then slide in the SIM card. Installing the microSD card Remove the rubber cap from the microSD ca slot.
  • Page 10 To remove the microSD card, open the rubber cap and press the microSD card gently. When the microSD card pops up automatically, take it out. Do not remove the card when it is being used. Otherwise, the card and the E5836 may be damaged, and the data stored on the card may be corrupted.
  • Page 11 /vendors, the E5836 may fail to work and you may damage the device. At the same time, any national regulations on terminal products or warranty applicable to the E5836 may fail to work. Method 2: Charging by Connecting to a...

  • Page 12: Accessing The Internet Through A Wi-Fi Connection

    Accessing the Internet through a Wi-Fi Connection Note: By default, the management parameters are preset on the E5836 according to the requirements of the service provider. You can follow the steps below to quickly access the Internet. For details about how to set the management parameters, see the Help section on the Web management page.
  • Page 13 Otherwise, you need to check your wireless network adapter. Click View available Wireless Networks to display the wireless network list. Select the network whose SSID is the same as that of the E5836, and then click...

  • Page 14: Connect To The Internet

    Note: If the encryption parameter is already set for the E5836, the Wireless Network Connection dialog box is displayed and requires the network key and confirmation. The SSID and key label is attached on the E5836. Wait until the wireless connection icon is displayed in the status area in the lower right corner of the screen.
  • Page 15 Mode Operations After the E5836 is powered on, it can automatically connect to the Auto Internet when data transmission is required. If data transmission is not performed over a period of time, the E5836 automatically disconnects from the Internet Manual...

  • Page 16: Accessing The Web Management Page

    The Connect button does not work in Auto mode. Accessing the Web Management Page Make sure that the connection between the E5836 and the comptuer is established. Start the Internet browser and enter http://192.168.1.1 in the address bar. Enter the password, and then click Login.
  • Page 17 Verifying the PIN Code When the PIN code protection is enabled, you need to launch the web management page and then enter the correct PIN code as prompted. Both the PIN and PUK are delivered with the SIM card. For details, consult your service provider. Sharing Data Stored on the microSD card After the microSD card is inserted, you can store data on the card or share the data stored on the card on the web management page.

  • Page 18: Daily Use

    Daily Use Saving Power mode If no operation is performed on the E5836 for a while, the screen turns off but the device will still be active. If the E5836 has not been accessed for 30 minutes by default, the E5836 changes to the deep sleep state.

  • Page 19: Restoring The Factory Defaults

    Establishing a WPS Connection If the Wi-Fi devices connected to the E5836 support the WPS function, the E5836 can generate a network key without manual input. To establish a WPS connection, do as follows: Power on the E5836. Start the Clients connected to the E5836.
  • Page 20 Tips If you cannot use the E5836 properly, you can try the following: See Help on the web management page. Restart the E5836. Restore the factory defaults. Contact your service provider.

  • Page 21: Example: Wi-Fi Connection To Game Machine (Psp)

    Example: Wi-Fi Connection to Game Machine (PSP) Turn on the PSP WLAN switch. Select Settings > Network Settings. Select Infrastructure Mode to connect your local Wi-Fi access point. Select New Connection to specify a mnemonic connection name (such as MyE5836). Select Scan to detect networks in range.
  • Page 22 E5836. Then press the > button consecutively to confirm the SSID and input the Wi-Fi key. SSID: The Wi-Fi name of the E5836. WEP: The Wi-Fi key of the E5836 The default SSID and key label is attached on the E5836.

  • Page 23: Example: Wi-Fi Connection To Smart Phone (Iphone)

    If necessary, enter a password and tap Join. (Networks requiring a password appear with a lock icon.) Note: The Wi-Fi Clients such as iTouch, PS3, and NDS can also access Internet via the E5836. For details about the operation, follow the user guides of the Wi-Fi Clients.

  • Page 24: Frequently Asked Questions (Faq)

    You must configure the correct peer-peer protocol (PPP) user name and PPP password when you access the Internet through the E5836. Check whether the user name and the password are correct, and see Profile Management on the management page for details.
  • Page 25 WEP type, and key. The SSID of the Client must be ANY or the same as that of the E5836. The WEP type and key of the Client must be the same as that of the E5836. Otherwise, you need to change the settings.

Table of Contents