Gas Connection - Miele KM 342 Installation Instructions Manual

Gas connection

Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
In Massachusetts a licensed
plumber / gas fitter is required.
This appliance must be installed
with its own shut off valve and the
included gas pressure regulator.
Both the valve and the regulator
must be easily accessible to the
consumer to turn on or shut off the
gas supply after the appliance is
installed.
This appliance and its individual
shut off valve must be disconnected
from the gas supply during any
pressure testing of the system
performed in excess of
(3.5 kPa), or isolated from the gas
supply line by closing its individual
manual shut off valve at test
pressures equal to or less than
1
/ psi (3.5 kPa).
2
Any pipe connections must be made
using a thread sealant approved for
gas connections. Failure to correctly
install these items could lead to a
gas leak and subsequent explosion.
12
1
/ psi
2
The gas connection must be made
in accordance with local codes or, in
the absence of local codes, with:
- the National Fuel Gas Code,
ANSI Z 223.1 / NFPA 54
for the USA.
or
- the current Can / CGA B 149.1
and .2 Installation Codes for gas
burning appliances for Canada.