Engine Oil & Filter
Add Engine Oil:
12.
Fill the crankcase with the recommended oil (page
3.9 US qt (3.7 )
13.
Install the oil filler cap/dipstick securely.
14.
Start the engine and let it idle for a few minutes.
15.
Stop the engine. Wait several minutes.
16.
Check that the oil level is at upper level mark on the dipstick (page
17.
Check that there are no oil leaks.
If a torque wrench is not used for installation, see your Honda dealer as soon as
possible to verify proper assembly.
132
Servicing Your Honda
127
), approximately:
128
).