AM/FM Radio
Ambience (AMB)
The ''ambience'' circuit blends and boosts certain frequencies from both
channels, for a ''live performance'' effect. AMB may be used for stereo
programs from the FM radio. However, the ambience circuit may make weak
FM stereo signals sound worse.
To use the circuit
To change the setting
Beep Set
To use the circuit
To change the setting
92
Audio Systems
push the MODE knob four times, and ''AMB''
will appear on the display. Then, within five
seconds, change the ambience setting.
turn the MODE knob (There are three settings: HI
(high), LO (low), OFF.)
push the MODE knob five times, and ''BEEP''
will appear on the display. Then, within five
seconds, change the beep setting.
turn the MODE knob. (ON or OFF)
MODE knob
MODE knob