Inspection
2
3
T908033
1. Lever
2. Adjuster (lever end)
3. 0.08 - 0.12 in (2 - 3 mm)
•
Check that there is 0.08 - 0. 1 2 in
(2 - 3 mm) of clutch lever free play
at the point shown in the diagram
above.
•
If there is an incorrect amount of
free play, adjustments must be
made.
Maintenance and Adjustment
1
Adjustment
1
T908034
1. Adjuster (engine end)
Note:
•
Knurled locknuts are fitted to
Thruxton and Bonneville T100
models
Bonneville
models
have
adjuster.
•
Loosen the knurled locknut at the
lever end of the clutch cable and
turn the adjuster sleeve until the
correct amount of clutch lever free
play is achieved.
•
Tighten the knurled locknut at the
clutch lever assembly.
•
If the correct adjustment setting
cannot be achieved using the lever
adjuster, use the adjuster at the
engine end of the cable.
•
Loosen the adjuster locknut.
only.
Bonneville,
SE
and
Scrambler
a
ratchet
type
73