Warning Lights; Turn Signals; High Beam; Neutral - Triumph Bonneville Owner's Handbook Manual

Triumph motorcycle owner's handbook
Hide thumbs Also See for Bonneville:
Table of Contents

Advertisement

General Information

Warning Lights

Turn Signals

When
switched on, the turn signal
warning light will flash on and off at the same
speed.

High Beam

When the headlights are switched
on and the headlight dimmer
switch is set to 'high beam', the high beam
warning light will illuminate.

Neutral

The neutral indicator light indicates
when the transmission is in neutral
(no gear selected). The indicator light will
illuminate when the transmission is in neutral
with the ignition switch in the ON position.
Engine Management
System Malfunction
Indicator Light
The malfunction indicator light for the engine
management system illuminates when the
ignition is switched on (to indicate that it is
working) but should not become illuminated
when the engine is running.
If the malfunction indicator light becomes
illuminated when the engine is running, this
indicates that a fault has occurred in one or
more of the systems controlled by the engine
management system. In such circumstances,
the engine management system will switch to
'limp-home' mode so that the journey may
be completed, if the fault is not so severe that
the engine will not run.
28
the
turn
signals
Reduce speed and do not continue to ride
are
for longer than is necessary with the
malfunction indicator light illuminated. The
fault
may
performance, exhaust emissions and fuel
consumption.
performance could cause a dangerous
riding condition, leading to loss of control
and an accident. Contact an authorized
Triumph dealer as soon as possible to have
the fault checked and rectified.
Note:
If the malfunction indicator light
flashes
switched on, contact an authorized
Triumph dealer as soon as possible
to have the situation rectified. In
these circumstances the engine
will not start.

Low Fuel

The
illuminate
approximately 0.92 US gal (3.5 liters) of fuel
remaining in the tank.

Low Oil Pressure

The low oil pressure warning light
becomes illuminated whenever the
oil pressure is dangerously low (or the
ignition switch is in the ON position with the
engine not running). When the engine is
running, the light will remain off when
sufficient oil pressure is present.
When starting the motorcycle, check that the
light comes on when the ignition is in the
Warning
adversely
affect
Reduced
when
the
ignition
low
fuel
indicator
when
there
engine
engine
is
will
is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents