Assembly; Packaging List; Wheel & Handle Kit Assembly Installation - GMC YUKON 3500 Owner's Manual

aSSeMblY

packaging List

CAUTION
Generator is heavy! Lifting generator can
cause back or other bodily injury.
NEVER lift generator without assistance.
Generator
Wheel & Handle Kit assembly
Wheel axle (1)
Wheel (2)
Bolt M8X16 (8)
Nut M8 (16)
Washer (2)
Split pin (2)
Axle holder (2)
Stand (2)
Connecting block (2)
Handles (2)
Handle sleeves (2)
Bolt M8X40 (6)
Cotter pin (2)
tool Kit
owners manual
10
Wheel & Handle Kit assembly
Installation
Keep all hands and fingers away from hinges when
folding down the handles.
Never use this wheel kit with any other product.
Never pull your generator with a vehicle or use on a
road.
1. Slide the wheels (5) over the axle (4) on both ends, then slide
2. Mount assembled axle (4) to the frame with axle holder (10),
3. Fit the two stands (11) on the frame with the two bolts (6) and
4. Fit the two handles (13) on the connecting block (12) with the
16
13
1. Mounting axle
4. Wheel axle (1)
5. Wheel (2)
6. Bolt M8X16 (8)
Customer Support: 1-866-409-4581
CAUTION
NOTICE
on the two washers (8) and insert the two split pins (9) into the
axle and spread apart.
bolt (6) and nut (7). Refer to diagram #1.
nuts (7).
two bolts (15) and nuts (7), then mount the assembled handle
on the frame. Use the two cotter pins (16) to hold handles in
an upright position.
15
12
7
6
7
7
9
8
5
10
7
7. Nut M8 (16)
diagram
8. Washer (2)
2. Shorter end
9. Split pin (2)
3. Longer end
10. Axle holder (2)
11. Stand (2)
Generator
7
14
6
#1
11
3
6
4
8
7
9
12. Connecting
block (2)
13. Handle (2)
14. Handle
sleeves (2)
15. Bolt M8X40 (6)
16
2