To Fit The Seat; To Remove The Seat; To Adjust The Seat Angle; Seat Forward Facing Or Rear Facing - Safety 1st Sky Black Instruction Manual & User Manual

Using: Shuttle Stroller Sky Black (cont)

TO FIT THE SEAT

• The seat is suitable for newborn. If your child is
not able to sit up unassisted, use the fully
reclined position only.
Placing the seat into position.
• Lower the seat onto the frame until it 'clicks',
as per Figure 10.

TO REMOVE THE SEAT

• Press (Red Button) on each side of the seat
mount and lift seat clear,as per Figure 10 (A).
TO ADJUSTING THE SEAT ANGLE
• The seat can be adjusted to 3 positions:
• A sitting position and 2 reclining positions.
• Push the adjustment buttons (A) on both
sides and tilt the seat into the desired
position (B), as per Figure 11.

SEAT FORWARD FACING OR REAR FACING

• Push the release button (A) on
both sides inwards and lift the seat
from the frame.
• Turn the seat in either facing forward
or facing you position and lower the
seat onto the frame again until it
'clicks', as per Figure 12.
When positioning and adjusting the seat, check that the adjustment/
release buttons are locked on both sides.
#14275-Safety 1st-Shuttle Stroller Sky Black-05-13
Instruction Manual & User Guide
Figure 10
A
B
Figure 11
Figure 12
A
9