Table of Contents
Advertisement
Table of Contents
Main Menu
Changing a Flat Tire (Canadian Model)
JACKING POINT
7.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
238
EXTENSION
WHEEL WRENCH
8.
Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
9.
Remove the wheel nuts and flat
tire. Place the flat tire on the
ground with the outside surface of
the wheel facing up.
BRAKE HUB
10.
Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
Advertisement
Chapters
Table of Contents
