Table of Contents
Advertisement
Table of Contents
Main Menu
Lights
Replacing Rear Bulbs
(in Fenders)
COVER
Open the trunk.
1.
2.
Remove the light assembly cover
by pulling its outside edge.
3.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
214
4.
Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
BULBS
assembly by turning it clockwise
until it locks.
5.
Test the new bulb to make sure it
works.
6.
Reinstall the light assembly cover.
SOCKETS
Replacing Rear Bulbs
(in Trunk Lid)
TRIM CLIP
1.
Open the trunk.
2.
Remove the trim clips from the
right or left corner of the trunk lid
trim by carefully prying them
using a small, flat-tip screwdriver
wrapped with tape.
Advertisement
Chapters
Table of Contents
