Honda 2005 Accord Hybrid Owner's Manual page 213

Table of Contents
Main Menu
Lights
Low Beam Headlight
HOLDING CLIPS
1. To change the passenger's side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver's side bulb, turn
the steering wheel to the right.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
212
3. Pull the inner fender cover away
from the fender and bumper.
4. Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
5. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
6. Install the new bulb and turn it
one-quarter turn clockwise to lock
it in place.
7. Push the electrical connector onto
the bulb.
8. Turn on the headlights to test the
new bulb.
9. Put the inner fender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
BULB
the center.