System On Cdp Charge; Sleep And Music - Toshiba Kira series User Manual

Disable features when
the battery level
reaches

System ON CDP Charge

This function enable/disable CDP (Charging Downstream Port) to use rapid
USB charge while the computer is powered on. When "System ON CDP
Charge Mode" is enabled, your computer can supply USB bus power
(DC5V, 1.5A) to the compatible ports while the computer is turned on.
To set System ON CDP Charge Mode, click Desktop -> Desktop Assist -
> Tools & Utilities -> System Settings -> USB.
Enabled
Disabled
The "System ON CDP Charge Mode" may not work with certain external
devices even if they are compliant with the USB specifications. In those
cases, use a USB port without "USB Sleep and Charge function" or disable
"System ON CDP Charge Mode".
It is recommended that AC adaptor be connected to the computer while
supplying USB bus power (DC5V, 1.5A).
When your computer battery capacity is too low to continue, "System ON
CDP Charge Mode" may not work. In those cases, connect the AC adaptor
and reboot the computer.
Always use the USB cable that was included with your USB device.
When "System ON CDP Charge Mode" or "USB Sleep and Charge
function" is enabled, the "USB Wakeup" function may not work. In that
case, use a USB port without "USB Sleep and Charge function" or disable
both "System ON CDP Charge Mode" and "USB Sleep and Charge
function".

Sleep and Music

The Headphone/Microphone jack supports the Sleep and Music function.
You can use your computer's speaker for the portable audio device, even
when the power of the computer is turned OFF.
"Power OFF" includes Sleep Mode, Hibernation Mode or shutdown state.
To set Sleep and Music feature, click Desktop -> Desktop Assist ->
Tools & Utilities -> System Settings -> Sleep and Music.
User's Manual
Specifies the lower limit of remaining battery life
by moving the slider bar. If the remaining battery
life falls below the setting, the Sleep and Charge
function will be stopped.
This setting is only available when the Function
under Battery Mode is enabled.
Rapid USB battery charge at maximum 1.5A
while PC is powered On.
Conventional USB battery charge while PC is
powered On.
5-12